Toggle mobile menu
Descrivi il prodotto e classifica...
Alt+ K
Voce 8501 — Electric motors and generators (excluding generating sets) | TariffCodex
8501
Voce 8501 — Electric motors and generators (excluding generating sets)
Home
/
Tariffa doganale
/
Capitolo 85
/
8501
Sottovoci
Codice
Designazione
Aliquota
8501100000
Motors of an output not exceeding 37,5|W
0%
8501101000
Synchronous motors of an output not exceeding 18|W
4.7%
8501101010
For use in certain types of aircraft
0%
8501101020
Synchronous motor for a dishwasher with a water flow control mechanism with -|a length without axle of 24|mm (+/- 0,3), -|a diameter of 49,3|mm (+/- 0,3) -|a rated voltage of 220|V AC or more but not more than 240|V AC, -|a rated frequency of 50|Hz or more but not more than 60|Hz, -|an input power of not more than 4|W, -|a rotation speed of 4rpm or more but not more than 4,8rpm, -|an output torque of not less than 10kgf/cm
0%
8501101040
Synchronous hybrid stepper motor with: -an output not exceeding 18 W, -two phases, -a rated current of not more than 2,5 A/phase, -a rated voltage of not more than 20 V, -with or without a threaded shaft, for use in the manufacture of 3D printers
0%
8501101050
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
0%
8501101060
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
0%
8501101090
Other
0%
8501109100
Universal AC/DC motors
2.7%
8501109100
Other
2.7%
8501109110
For use in certain types of aircraft
0%
8501109190
Other
0%
2.7%
0%
0%
2.7%
0%
8501109920
Other
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
0%
2.7%
2.7%
2.7%
2.7%
2.7%
0%
8501310000
Other DC motors; DC generators, other than photovoltaic generators
0%
0%
2.7%
2.7%
8501310045
Other
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
0%
0%
2.7%
2.7%
2.7%
2.7%
2.7%
0%
0%
2.7%
8501320040
Other
2.7%
2.7%
2.7%
0%
2.7%
0%
0%
2.7%
2.7%
2.7%
0%
0%
2.7%
0%
0%
0%
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
0%
2.7%
0%
0%
2.7%
2.7%
2.7%
2.7%
0%
8501510000
Other AC motors, multi-phase
0%
0%
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
2.7%
0%
0%
0%
8501522050
Other
2.7%
2.7%
2.7%
2.7%
2.7%
0%
0%
2.7%
0%
0%
2.7%
0%
2.7%
0%
0%
0%
0%
0%
0%
8501538100
Other, of an output
0%
0%
0%
2.7%
2.7%
2.7%
0%
0%
2.7%
0%
0%
0%
8501610000
AC generators (alternators), other than photovoltaic generators
0%
0%
0%
2.7%
0%
0%
2.7%
0%
0%
2.7%
2.7%
0%
0%
2.7%
2.7%
8501710000
Photovoltaic DC generators
2.7%
2.7%
2.7%
2.7%
Trova il codice tariffario esatto
8501109300
AC motors
8501109310
For use in certain types of aircraft
8501109390
Other
8501109900
DC motors
8501109910
For use in certain types of aircraft
8501109920
Worm axis motor for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with a worm wheel, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
8501109930
Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or higher but not higher than 16 V, -with a rated output mechanical power not exceeding 20 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
8501109940
Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited DC motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 35 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
8501109950
Electric (DC) motor powering height adjusting with: -a rated output mechanical power not exceeding 35 W, -frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g, -a stall torque of 45 Nm and ultimate torque of 200 Nm, -a maximum current of 15 A, -no load speed of 7 RPM or more but not more than 10 RPM, -a rotation speed of 4 000 RPM or more but not more than 5 600 RPM, -a maximum noise level of 42 dB(A), -a maximum angular backlash up to 3 degrees, and -a 8 tooth pinion module, for use in the manufacture of automotive components for car's seats
8501109956
DC Motor: - with a speed rotation of not more than 7 000 rpm without load, - with a nominal voltage of not more than 18 V, - with a maximum power of 24 W, - for a specific temperature range from -40°C to 160°C, - with or without a gear connection, - with or without a mechanical attachment interface, - with 2 electrical connections, - with a maximum torque of 100 Nm
8501109958
DC Motor : -|with a speed rotation of not more than|6500|rpm (without load), -|with a nominal| voltage of 12|V (± 4|V), -|with a maximal power below than 20|W, -|with a specified temperature range from -40°C to 160°C, -|with a worm gear drive, -|with a mechanical attachment interface, -|with 2|electrical connections, -|with a maximum torque of 75|Nm
8501109960
DC motor -|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded -|with a power supply voltage of 100|V or more but not more than 240|V for use in the manufacture of electric fryers
8501109964
DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: -with Ingress Protection (IP) standard of IP69, -with a rotor speed of not more than 6 500 rpm when not loaded, -with a rated voltage of 12,0 V (± 0,1), -of a specified temperature range of - 40 °C or more but not more than 165 °C, -with or without a connecting pinion, -with or without an engine connector, -with or without a flange, -with a diameter of not more than 40 mm (not including the flange), -with an overall height of not more than 90 mm (from the base to the pinion)
8501109965
Electric turbocharger actuator, with: -|a DC motor, -|an integrated gear mechanism, -|a (pulling)force of 200|N or more at a minimum of 140°C elevated ambient temperature, -|a (pulling) force of 250|N or more in each position of its stroke, -|an effective stroke of 15|mm or more but not more than 25|mm, -|with or without an on-board diagnostics interface
8501109970
DC stepping motor, with -|a two-phase winding,| -|a rated voltage of 9|V or more, but not more than 16,0|V -|of a specified temperature range covering at least|- 40|°C to +|105|°C -|with or without connecting pinion -|with or without motor drive connector
8501109975
Permanently excited DC motor with - a multiple-phase winding, - an external diameter of 24 mm or more but not more than 38 mm, - a rated speed of not more than 12 000 rpm, - a power supply voltage of 8 V or more but not more than 27 V, - with or without a pulley, - with or without a gear wheel
8501109979
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm or a pinion, of a specified temperature range covering at least - 20°C to + 70°C
8501109990
Other
8501200000
Universal AC/DC motors of an output exceeding 37,5|W
8501200010
Of an output exceeding|735|W but not exceeding|150|kW, for use in civil aircraft
8501200020
Of an output of less than 750|W or exceeding 150|kW, for use in certain types of aircraft
8501200050
Universal AC/DC motor, rotating: -with a nominal supply voltage of 230 V, -with a power of more than 37,5 W but not more than 2 000 W, -with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances
8501200060
Universal AC/DC motor, rotating: -with a nominal supply voltage of 230 V, -with a power of more than 37,5 W but not more than 1 200 W, -with a stator cross-section of 65 mm or more but not more than 75 mm and a thickness of 15 mm or more but not more than 45 mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances
8501200070
Universal AC/DC motor, rotating: -with a nominal supply voltage of 230 V, -with a power of more than 37,5 W but not more than 700 W, -with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances
8501200090
Other
8501310000
Of an output not exceeding 750|W
8501310010
Motors of an output exceeding|735|W, DC generators, for use in civil aircraft
8501310020
For use in certain types of aircraft
8501310045
DC motors, brushless, with: -|an external diameter of 90|mm or more, but not more than 110|mm, -|a rated speed of not more than 3|680|rpm, -|an output of 600|W or more but not more than 740|W at 2|300|rpm and at 80|°C, -|a supply voltage of 12|V, -|a torque of not more than 5,67|Nm, -|a rotor position sensor, -|an electronic star-point relay, and -|for use with an electric power steering control module
8501310047
Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited DC motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with Hall Effect Sensor, -with a nominal voltage of 8 V or more but not more than 16 V, -with a rated output mechanical power not exceeding 120 W, and -with a specified temperature range from -40 °C to 160 °C, for use in the manufacture of automotive components for car's seats
8501310048
Brushless DC electric motors: -with a rated power of 240 W or more, but not more than 260 W, -with a voltage of 36 V or higher, but not higher than 52 V -with a torque of 20 Nm or more, but not more than 140 Nm, -with a housing made of aluminum, aluminum alloy or plastic, -with or without a built-in controller, -with a communication function in the LIN or UART interface, -weighing 1,5 kg or more, but not more than 5,0 kg, -adapted for mounting in a bicycle frame for use in the manufacture of e-bikes
8501310049
Brushless DC electric motors: - with a rated power of 240 W or more, but not more than 260 W, - with a voltage of 24 V or higher, but not higher than 52 V, - with a torque of 30 Nm or more, but not more than 62 Nm, - with a LIN, UART or CAN communication interface, - with an internal planetary gearbox with fixed or variable ratio or direct drive, - with a housing made of aluminum or aluminium alloy, - with a weight of 1,5kg or more, but not more than 6kg, - adapted for mounting in the front or rear bicycle wheel, for use in the manufacture of e-bikes
8501310050
DC motors, brushless, with:| -|an external diameter of 80|mm or more, but not more than 200|mm, -|a supply voltage of 4|V or more, but not more than 16|V, -|an output at 20|°C of 200|W or more, but not more than 750|W, -|a torque at 20|°C of 2,00|Nm or more, but not more than 7,00|Nm, -|a rated speed at 20|°C of 600|rpm or more, but not more than 3|100|rpm, -|with or without a pulley, - with or without an electronic power steering sensor/controller
8501310052
Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with: -a three-phase winding, -an output power not exceeding 280 W, -a length with gearhead of 116,1 mm or more but not more than 117,2 mm, -an external diameter of 13,86 mm or more but no more than 13,92 mm, -a maximum torque of motor with gearhead 246,6 mNm in 25℃, -a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C, -a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure, -14 functional pins for power and control purpose, -a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector for use in the manufacture of medical devices with right-left rotation and oscillation function
8501310054
Brushless DC electric motor, with: -a rated voltage of 310 V, -a rated power of 350 W or more but not more than 368 W, -an input power of 500 W or more but not more than 550 W, -output power of 350 W or more but not more than 400 W, -an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm, -a rated speed of 16300 rpm or more but not more than 16500 rpm, -a weight of 2,33 kg or more but not more than 2,40 kg, -a pulley
8501310055
DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with: -an external diameter of 24,2 mm or more, but not more than 140 mm, -a rated speed of 3300 rpm or more, but not more than 26200 rpm, -a rated supply voltage of 3,6 V or more, but not more than 230 V, -an output power of more than 37,5 W , but not more than 2400 W, -a free load current of not more than 20,1 A, -a maximum efficiency of 50 % or more,
8501310056
DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power Pack with: -a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure, -a CAN-communication interface, -an external sensor interface, -operating temperature range of -40℃ to 95℃ or broader, -compliance with standard IP6K9K for water and dustproofness, -supply voltage of 9 V or more, but not more than 16 V, -rated power output of 500 W or more, but not higher than 750 W, -rated torque of 3 Nm or more, but not more than 6 Nm, -length of 150 mm or more, but not more than 250 mm, -width of 100 mm or more, but not more than 150 mm, -height of 80 mm or more, but not more than 120 mm
8501310057
Brushless DC electric motor with LCD control indicator and/or control unit with buttons: -with an output power of 200 W or more, but not more than 700 W, -with a supply voltage of 30 V or more, but not more than 60 V, -with a torque of 30 Nm or more, but not more than 200 Nm, -with a height of 117 mm or more, but not more than 146 mm, -with a length of 117 mm or more, but not more than 223 mm, -with a width of 135 mm or more, but not more than 190 mm, -with a weight of 2 kg or more but not more than 5 kg, -designed to be mounted in a frame, front or rear bicycle wheel, -equipped with sockets, at least for cable connection with LCD control indicator, for use in the manufacture of electric bicycles
8501310058
Permanently excited DC motor with: -an external diameter of 27 mm or more but not more than 90 mm, including mounting flange, -a rated speed of not more than 25 000 rpm, -an output of 45 W or more but not more than 400 W, and -a supply voltage of 9 V or more but not more than 50 V, -whether or not a multiple-phase winding, -whether or not with a drive disc, -whether or not with a crankcase, -whether or not with a fan, -whether or not with a cap assembly, -whether or not with a sun gear, -whether or not with a speed and rotational direction encoder, -whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, -whether or not with a mounting flange for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture
8501310063
Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: - a specified speed of not more than 6000rpm, - a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V), - a flange diameter of 85mm or more but not more than 200mm, - a maximum length of 335mm, measured from the beginning of the shaft to the outer ending, - a housing length of not more than 265mm, measured from the flange to the outer ending, - a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), - a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and - surface magnets, - whether or not with electronic power steering controller, - whether or not with pulley or coupling, - whether or not with rotor position sensor
8501310068
Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: -a length of 110 mm or more but not more than 140 mm, -a width of 90 mm or more but not more than 130 mm, -a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles
8501310085
Power transmission device for controlling the output of exhaust gas turbochargers, consisting of: - a DC motor of an output not exceeding 600 W, - for usage with a supply voltage of 8 V or more but no more than 48 V, - with motor connection (plug-in connection), - whether or not with position sensor, - whether or not with integrated control and power electronics, - whether or not with spring mechanism for resetting the lever, - built in a housing with reduction gear and lever attached to the motor drive shaft, or - built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod
8501310099
Other
8501320000
Of an output exceeding 750|W but not exceeding 75|kW
8501320010
For use in civil aircraft
8501320040
DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with: -an external diameter of 24,2 mm or more, but not more than 140 mm, -a rated speed of 3300 rpm or more, but not more than 26200 rpm, -a rated supply voltage of 3,6 V or more, but not more than 230 V, -an output power of more than 37,5 W , but not more than 2400 W, -a free load current of not more than 20,1 A, -a maximum efficiency of 50 % or more,
8501320065
Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: - a specified speed of not more than 6000rpm, - a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V), - a flange diameter of 85mm or more but not more than 200mm, - a maximum length of 335mm, measured from the beginning of the shaft to the outer ending, - a housing length of not more than 265mm, measured from the flange to the outer ending, - a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), - a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and - surface magnets, - whether or not with electronic power steering controller, - whether or not with pulley or coupling, - whether or not with rotor position sensor
8501320099
Other
8501330000
Of an output exceeding 75|kW but not exceeding 375|kW
8501331000
Hydrogen fuel cell generators
8501339000
Other
8501339010
Motors of an output not exceeding 150 kW and generators, for use in civil aircraft
8501339020
Of an output exceding 150 kW, for use in certain types of aircraft
8501339030
Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics
8501339099
Other
8501340000
Of an output exceeding 375|kW
8501340010
Generators for use in civil aircraft
8501340099
Other
8501400000
Other AC motors, single-phase
8501402000
Of an output not exceeding 750|W
8501402010
Of an output exceeding|735|W, for use in civil aircraft
8501402020
For use in certain types of aircraft
8501402035
Electric AC motor, single-phase, with: -a rated power of 120 W or more but not more than 150 W, -an input power of 280 W or more but not more than 350 W, -an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm, -a rated speed of 2 680 rpm or more but not more than 3 000 rpm, -a weight of 4,2 kg or more but not more than 4,6 kg, -pulleys, a spindle and a tachometer, for use in the manufacture of home appliance products
8501402045
Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a rated speed of 15 000 rpm or more but not more than 20 000 rpm, -a weight of 4,2 kg or more, -a pulley and a tachometer, for use in the manufacture of home appliance products
8501402050
Electric AC motor, single-phase, with: -a rated power of 300 W or more but not more than 370 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a rated speed of 15 000 rpm or more but not more than 19 000 rpm, -a weight of 4,8 kg or more, -a pulley, for use in the manufacture of home appliance products
8501402055
Electric AC motor, single-phase, with: -a rated power of 275 W or more, but not more than 325 W, -an input power of 600 W or more but not more than 700 W, -an external diameter without bracket and connector of 160 mm or more but not more than 180 mm, -a rated speed of 15 000 rpm or more but not more than 19 000 rpm, -a weight of not more than 4,4 kg, -a pulley, for use in the manufacture of home appliance products
8501402060
Electric AC motor, single-phase, with: -a rated power of 275 W or more but not more than 325 W, -an output power of 550 W or more but not more than 600 W, -an input power of 800 W or more but not more than 1 000 W, -an external diameter of more than 150 mm but not more than 170 mm without the bracket, -a rated speed of more than 16 000 rpm but not more than 18 000 rpm, -a weight of 3,4 kg or more but not more than 3,7 kg, -a pulley, for use in the manufacture of home appliance products
8501402070
Electric AC motor, single-phase, whether or not with commutator - with a nominal output of 180 W or more, - with an input power of 150 W or more but not more than 2 700 W, - with an external diameter of more than 44,8 but not more than 135,2 mm, - with a rated speed of more than 10 000 rpm but not more than 50 000 rpm, - whether or not equipped with air-inducting ventilator, - whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft, for use in the manufacture of domestic appliances
8501402075
Incomplete, single-phase brushless AC motor consisting of a rotor and a stator: -a rotor on the inside is equipped with a ring of 12 magnets housed in a steel casing, -a stator with an internal diameter of 206,6 mm (± 0,5 mm), external diameter of 265,0 mm (± 0,2 mm) and width of 37,2 mm or more but not more than 47,8 mm, -with a rated power not exceeding 750 W, -with a weight of 5 kg or more, for use in the production of washing machines, washer-dryers equipped with a drum with direct drive
8501402080
Other
8501408000
Of an output exceeding 750|W
8501408010
Of an output not exceeding|150|kW, for use in civil aircraft
8501408020
Of an output exceeding|150|kW, for use in certain types of aircraft
8501408050
Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics
8501408070
Electric AC motor, single-phase, whether or not with commutator - with a nominal output of 180 W or more, - with an input power of 150 W or more but not more than 2 700 W, - with an external diameter of more than 44,8 but not more than 135,2 mm, - with a rated speed of more than 10 000 rpm but not more than 50 000 rpm, - whether or not equipped with air-inducting ventilator, - whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft, for use in the manufacture of domestic appliances
8501408090
Other
8501510000
Of an output not exceeding 750|W
8501510010
Of an output exceeding|735|W, for use in civil aircraft
8501510020
Of an output of less than 750|W, for use in certain types of aircraft
8501510025
Electric permanent magnet synchronous motor with: -an output power of 550 W, -a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover, -an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, -terminals located across the radius 32,5 mm and separated by an angle of 21,8°, -a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard), -a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad, -a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental), -a cogging torque of no more than 13 mNm, -a friction torque in ambient temperature of no more than 22 mNm, -a maximum temperature of motor operation of no more than 200 °C
8501510030
AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With: - an output of 340W or more but not more than 7,4kW, - a flange of dimensions of not more than 180mm × 180mm, and - a length from flange to extreme end of resolver of not more than 271mm
8501510035
Electric permanent magnet synchronous motor with: -an output power of 600 W, -a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover, -an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, -terminals located across the diameter 59,2 mm and separated by an angle 30,0°, -a housing made of electrogalvanized steel (per JIS G3313 Grade SECE standard) using a deep-drawing stamping process, -a diameter of 88,600 mm or less but no less than 88,546 mm at the motor-system assembly interface, -a back electromotive force constant (Ke) of 0,03277 V-sec/rad or more but no more than 0,03623 V-sec/rad, -a back electromotive force harmonic order - 5th of no more than 0,35 % (of fundamental) and 7th of no more than 0,30 % (of fundamental), -a cogging torque of no more than 12 mNm, -a friction torque in ambient temperature of no more than 23 mNm, -a maximum temperature of motor operation of no more than 200 °C
8501510040
Electric AC motor, three-phase, with: -a rated power of 280 W or more but not more than 320 W, -an output power of 480 W or more but not more than 540 W, -an input power of 800 W or more but not more than 900 W, -an external diameter of 150 mm or more but not more than 170 mm, -a rated speed of 15 000 rpm or more but not more than 20 000 rpm, -a weight of 6 kg or more but not more than 6,4 kg, -a pulley and a tachometer, for use in the manufacture of home appliance products
8501510045
Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed of not more than 7000 rpm, -an output of 400 W or more but not more than 750 W (at 12 V), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 265 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface), -a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley or coupling, -whether or not with rotor position sensor
8501510050
Three phase AC synchronous brushless permanent magnet motor with: -an output of 500 W or more but not more than 700 W, -an external diameter of 129,7 mm or more but not more than 180,3 mm, -a rated speed of 16 000 rpm or more but not more than 17 000 rpm, -a weight of 2,5 kg or more but not more than 3,1 kg, and -with a pulley, for use in the manufacture of home appliance products
8501510090
Other
8501520000
Of an output exceeding 750|W but not exceeding 75|kW
8501522000
Of an output exceeding 750|W but not exceeding 7,5|kW
8501522010
For use in civil aircraft
8501522050
AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With: - an output of 340W or more but not more than 7,4kW, - a flange of dimensions of not more than 180mm × 180mm, and - a length from flange to extreme end of resolver of not more than 271mm
8501522070
Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed of not more than 7000 rpm, -an output of 750 W or more but not more than 1,8 kW (at 12 V), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 265 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface), -a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley or coupling, -whether or not with rotor position sensor
8501522080
Electric permanent magnet synchronous motor with: -an output power of 850 W, -a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover, -an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, -terminals located across the radius 26,2 mm and separated by an angle 30,0°, -a housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard) and anodized coating (per ASTM B580 type E standard), -a back electromotive force constant (Ke) of 0,04009 V-sec/rad or more but no more than 0,04431 V-sec/rad, -a back electromotive force harmonic order - 5th of no more than 0,36 % (of fundamental) and 7th of no more than 0,24 % (of fundamental), -a cogging torque of no more than 20 mNm, -a friction torque in ambient temperature of no more than 26,5 mNm, -a maximum temperature of motor operation of no more than 200 °C
8501522089
Other
8501523000
Of an output exceeding 7,5|kW but not exceeding 37|kW
8501523010
For use in civil aircraft
8501523090
Other
8501529000
Of an output exceeding 37|kW but not exceeding 75|kW
8501529010
For use in civil aircraft
8501529090
Other
8501530000
Of an output exceeding 75|kW
8501535000
Traction motors
8501535010
Electric drive for motor vehicles, with an output of not more than 315 kW: - with an AC or DC motor with or without transmission, - with or without power electronics
8501535020
AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with: -a torque output of 200 Nm or more, but not more than 400 Nm, -a power output of 50 kW or more, but not more than 200 kW , -a rotation speed of no more than 15 000 rpm, for use in the manufacture of electric vehicles
8501535030
Permanent magnet synchronous traction motor, with: -a continuous power of 110 kW or more but not more than 180 kW, -a liquid cooled system, -a total length of 500 mm or more but not more than 650 mm, -a total width of 600 mm or more but not more than 700 mm, -a total height of 550 mm or more but not more than 650 mm, -weighing of not more than 350 kg, -3 suspension points
8501535040
Permanent magnet traction AC motor, with: -a continuous power of 110 kW or more but not more than 150 kW, -a liquid cooled system, -a total length of 460 mm or more but not more than 590 mm, -a total width of 450 mm or more but not more than 580 mm, -a total height of 490 mm or more but not more than 590 mm, -a weight of not more than 310 kg, -4 mounting points
8501535050
Asynchronous traction motor, with: -a continuous power of 140 kW or more but not more than 180 kW, -a liquid cooled system, -a total length of 580 mm or more but not more than 730 mm, -a total width of 550 mm or more but not more than 670 mm, -a total height of 510 mm or more but not more than 630 mm, -with a weight of not more than 390 kg, -with or without reduction gear, -with or without starter generator, -2 mounting points, for use in the manufacture of the electric drive of hybrid buses
8501535090
Other
8501538100
Exceeding 75|kW but not exceeding 375|kW
8501538110
Of an output not exceeding|150|kW, for use in civil aircraft
8501538120
Of an output exceeding|150|kW, for use in certain types of aircraft
8501538190
Other
8501539400
Exceeding 375|kW but not exceeding 750|kW
8501539410
For use in certain types of aircraft
8501539490
Other
8501539900
Exceeding 750|kW
8501539910
For use in certain types of aircrafts
8501539990
Other
8501610000
Of an output not exceeding 75|kVA
8501612000
Of an output not exceeding 7,5|kVA
8501612010
For use in civil aircraft
8501612090
Other
8501618000
Of an output exceeding 7,5|kVA but not exceeding 75|kVA
8501618010
For use in civil aircraft
8501618099
Other
8501620000
Of an output exceeding 75|kVA but not exceeding 375|kVA
8501620010
For use in civil aircraft
8501620040
AC, 3-phase generator, with: -a continuous power of 147 kVA or more but not more than 222 kVA, -a continuous torque of 650 Nm or more but not more than 900 Nm, -a maximum working speed of 2700 revolutions per minute (rpm), -a liquid cooled system, -a length of 100 mm or more but not more than 200 mm, -a width of 550 mm or more but not more than 650 mm, -a height of 550 mm or more but not more than 650 mm, -weighing of not more than 150 kg
8501620098
Other
8501630000
Of an output exceeding 375|kVA but not exceeding 750|kVA
8501630010
For use in civil aircraft
8501630099
Other
8501640000
Of an output exceeding 750|kVA
8501710000
Of an output not exceeding 50|W
8501720000
Of an output exceeding 50|W
8501800000
Photovoltaic AC generators
Trova il codice tariffario esatto
← Torna al capitolo 85