Question 1

Quels codes tarifaires relèvent de la position 7609 ?

Accepted Answer

7609000010 — For use in certain types of aircraft; 7609000030 — Aluminium connecting block for automotive air conditioning systems: 
 
-with a T6 hardening, 
 
-equipped with round stubs with a circumferential outer groove,
 
-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,
 
-with a distance between holes of 15 mm or more but not more than 22 mm,
 
-with sockets designed for brazing or clamping,
 
-with mounting holes for M6 or M8 mounting screw, threaded or not,
 
-with a width of 5 mm or more but not more than 16 mm,
 
-for connecting a compressor, a condenser, an evaporator, a chiller and other lines; 7609000040 — Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:
 
-with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,
 
-with a weight of 0,02 kg or more, but not more than 0,25 kg,
for use in the manufacture of cooling system in vehicles of Chapter 87; 7609000050 — Machined aluminium components:
 
-containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,
 
-containing by weight 0,55 %, or more but not more than 0,61 % of silicon,
 
-with a hardening state of T5 or T6,
 
-with a mass of 0,05 kg or more, but not more than 0,2 kg,
for use in the manufacture of CO₂ cooling systems in motor vehicles; 7609000060 — Aluminium connection block:
 
-with a weight of 3 g or more but not more than 400 g,
 
-manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,
 
-being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,
 
-with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),
 
-with sockets designed for brazing or fastening,
 
-with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,
for the manufacture of automotive cooling and air conditioning systems

Question 2

Comment classifier les produits sous Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) ?

Accepted Answer

Utilisez la classification IA de TariffCodex pour trouver le code TARIC exact de votre produit.

Position 7609 — Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)

Sous-positions

Code	Désignation	Taux de droit
7609000010	For use in certain types of aircraft	5.9%
7609000030	Aluminium connecting block for automotive air conditioning systems: -with a T6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, -with a distance between holes of 15 mm or more but not more than 22 mm, -with sockets designed for brazing or clamping, -with mounting holes for M6 or M8 mounting screw, threaded or not, -with a width of 5 mm or more but not more than 16 mm, -for connecting a compressor, a condenser, an evaporator, a chiller and other lines	5.9%
7609000040	Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers: -with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm, -with a weight of 0,02 kg or more, but not more than 0,25 kg, for use in the manufacture of cooling system in vehicles of Chapter 87	5.9%
7609000050	Machined aluminium components: -containing by weight 0,55 %, or more but not more than 0,61 % of magnesium, -containing by weight 0,55 %, or more but not more than 0,61 % of silicon, -with a hardening state of T5 or T6, -with a mass of 0,05 kg or more, but not more than 0,2 kg, for use in the manufacture of CO₂ cooling systems in motor vehicles	5.9%
7609000060	Aluminium connection block: -with a weight of 3 g or more but not more than 400 g, -manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade, -being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly, -with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line), -with sockets designed for brazing or fastening, -with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm, for the manufacture of automotive cooling and air conditioning systems	5.9%
7609000090	Other	5.9%