Toggle mobile menu
Describa el producto y clasifique...
Alt+ K
Partida 8482 — Ball or roller bearings | TariffCodex
8482
Partida 8482 — Ball or roller bearings
Inicio
/
Arancel aduanero
/
Capítulo 84
/
8482
Subpartidas
Código
Designación
Arancel
8482100000
Ball bearings
8%
8482101000
With greatest external diameter not exceeding 30|mm
0%
8482101015
Ball bearings with: -an internal diameter of 4 mm or more but not more than 9 mm, -an external diameter of not more than 26 mm, -a width of not more than 8 mm, for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm
0%
8482101090
Other
0%
8482109000
Other
0%
8482200000
Tapered roller bearings, including cone and tapered roller assemblies
8%
8482300000
Spherical roller bearings
8%
8482400000
Needle roller bearings, including cage and needle roller assemblies
8%
8482500000
Other cylindrical roller bearings, including cage and roller assemblies
8%
8482500020
Axial roller bearing made of steel: -the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98, -the rollers are made of anti-friction steel according to ASTM 295-94, -with an external diameter of 63 mm or more but not more than 66 mm, -with an internal diameter of 44 mm or more but not more than 46 mm, -with a weight of 23 g or more but not more than 27 g, -with 36 rollers or more but not more than 38 rollers
0%
8482500090
Other
0%
8482800000
Other, including combined ball/roller bearings
8%
0%
0%
0%
8482910000
Parts
0%
8%
7.7%
0%
0%
8%
0%
0%
0%
0%
0%
Encontrar el código arancelario exacto
8482800010
Connecting components for use in the production of helicopter tail rotor shafts
8482800090
Other
8482910000
Balls, needles and rollers
8482911000
Tapered rollers
8482919000
Other
8482919010
Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, - made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), - with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry
8482919090
Other
8482990000
Other
8482990030
Brass cages with the following characteristics: – continuously or centrifugally cast, – turned, – containing by weight 35 % or more, but not more than 38 % of zinc, – containing by weight 0,75 % or more, but not more than 1,25 % of lead, – containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and – with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearings
8482990060
Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of: 14 mm or more but not more than 77 mm for the inner ring, 26 mm or more but not more than 101 mm for the outer ring for use in the manufacture of bearings
8482990070
Male and female parts of cages, - made of flat-rolled steel, - with a diameter of 14,5 mm or more but not more than 420 mm, - the male part including rivets, - the female part including holes, used for manufacturing of deep grove ball bearings
8482990080
Punched cages of various diameters, - made of flat rolled steel, - with tensile strength of 270 MPa or more, for the production of tapered roller bearings
8482990090
Other
Encontrar el código arancelario exacto
← Volver al capítulo 84